Miller® Anchorage Connectors

Miller Anchorage Connectors are used for securing a connecting device to an anchorage. Careful consideration should be give to selecting a proper anchorage for ultimate safety. The anchorage should: Be easily accessible; support 5,000 pounds (222kN) per worker; and be located a safe distance above any lower obstacles.

Miller Anchorage Connectors meet all applicable OSHA and ANSI requirements.

First Integral Positive-Lock Engagement System

Miller® Shadow® Beam Anchors

Miller Shadow Beam Anchors connect horizontally to a wide range of I and H beam flanges from 4 inches (100mm) to 24 inches (610mm) wide and up to 2-1/2 inches (63mm) thick. Once attached, the units (Models 8811 and 8814) slide along the beam with the worker to provide increased safety, mobility and productivity. The fixed unit (Model 8815) is designed to be tightened horizontally or vertically, firmly gripping the beam or column to provide a temporary or permanent anchorage attachment.

Model Number Description Fits Flange
Sizes
Occupations
&
Applications
8811 Shadow Beam Anchor only - 100% steel construction 5” to 12”
(127mm to 305mm)
8812 Shadow Beam Anchor (8811) with SofStop Shock Absorber 5” to 12”
(127mm to 304mm)
8814-12 Lightweight, adjustable Shadow Beam Anchor - stainless steel & high strength aluminum 4” to 12”
(100mm to 305mm)
8814-24 Lightweight, adjustable Shadow Beam Anchor - stainless steel & high strength aluminum 12” to 24”
(305mm to 610mm)
8815-12 Lightweight, fixed Shadow Beam Anchor - stainless steel & high strength aluminum 4” to 12”
(100mm to 305mm)
8815-24 Lightweight, fixed Shadow Beam Anchor - stainless steel & high strength aluminum 12” to 24”
(305mm to 610mm)
Integral Positive-Lock Engagement System

To ensure proper installation, Miller Shadow Beam Anchors feature the first integral positive-lock engagement system on the market. With it, the anchor jaws are locked firmly into the cross bar with a durable spring-loaded engagement pin. Unlike competitive models, Miller Shadow Beam Anchors eliminate the need for loose connection pins which can be installed incorrectly or inadvertently disengaged.


Temporary Anchorage Connectors

Push-Thru Eye Bolt 420

This anchorage connector offers simple one-hand installation and can be used for a wide range of applications. Includes integral SofStop Shock Absorber.

Wire Hook 470

Stainless steel wire hook connects to various anchorages including railings, small I-beams, angle iron and scaffolding. Simply squeeze the hook and slip the large opening over the approved structure.

Extension Pole & Hook 475

The extension pole and hook is ideal for climbing ladders and towers. Installs fall arrest systems up to 20 feet (6m) from ground level to angle iron, piping and related structures.

Rebar Hook Anchors 480/485

Designed to facilitate anchoring to scaffolding, pipe or angle iron, this anchor features a locking rebar hook for easy, one-hand installation and a D-ring on the other end to accommodate the connecting device.

Cross-Arm Strap 8183

The Miller cross-arm strap wraps around I-beams and other structures forming a secure attachment point for lanyards and other connecting devices.

Beam Trolleys 8804/9065

Miller Beam trolleys are adjustable to fit different size I-beams and slide along with the worker to provide maximum mobility. The new lightweight beam trolley with retrofit kit adjusts to fit beam flanges from 3 inches (76mm) to 8-1/2 inches (216mm) wide.

Carabiners 17D-1/17D-2, 18D-1/18D-2

Convenient, twist-lock carabiners have an unlimited number of uses.

17D-1 Steel Carabiner 1” (25mm) gate opening

17D-2 Lightweight Aluminum Carabiner 1” (25mm) gate opening

18D-1 Steel Carabiner 2” (50mm) gate opening

18D-2 Lightweight Aluminum Carabiner 2-1/4” (57mm) gate opening


Occupation / Application Legend
Construction Industrial Ironworker Painter Positioning Roofing Scaffold Telecommunications Universal Utility Warehouse

Miller Temporary Anchorage Connectors
Model Number Product Description Occupations
&
Applications
420 Push-Thru Eye Bolt Spring-action anchorage connector fits ¾” (19mm)diameter holes; features SofStop Shock Absorber
470 Wire Hook Stainless steel, spring-loaded wire hook
475 Extension Pole & Hook 20’ (6m) extension pole with spring-loaded hook
480 Rebar Hook Anchor Locking rebar hook (w/2-1/2” (63mm) throat opening) and D-ring connected w/2” (50mm) nylon webbing
485 Rebar Hook Anchor Same as Model 480 except includes the integral SofStop shock absorber
440 Cross-Arm Chain 6’ (1,8m) chain with an oval ring on each end
8183 Cross-Arm Strap 2” (50mm) nylon webbing strap features a 2” (50mm) D-ring which slips though a 3” (76mm) D-ring
8185 Looped Cross-Arm Strap 2” (50mm) nylon webbing strap features a 2” (50mm) D-ring which slips through looped webbing
450 Beam Clamp Steel clamp designed for attachment to horizontal I-beams, S-beams & W-beams up to 9” (229mm) wide; features swivel attachment ring for connecting devices
455 Beam Clamp Same as Model 450 except that it accommodates beams up to 12-1/2” (317mm) wide
8804 Beam Trolley Steel, sliding beam trolley accommodates I-beams from 3” (76mm) to 8” (203mm) wide
9065 Beam Trolley Steel, sliding beam trolley accommodates I-beams up to 4-1/2” (114mm) wide; load rating up to 400 lbs (1.8kN)
9065-1 Beam Trolley Retrofit Kit Retrofit kit used w/model 9065 accommodates I-beams up to 8-1/2” (216mm) wide
16D-1 Screw-Lock Carabiner Steel screw-lock carabiner w/1” (25mm) throat opening
17D-1 Twist-Lock Carabiner Steel twist-lock carabiner w/1” (25mm) throat opening
17-D2 Twist-Lock Carabiner Lightweight, aluminum twist-lock carabiner w/1” (25mm) throat opening
17-D3 Triple-Action Twist-Lock Carabiner Lightweight, aluminum, triple-action twist-lock carabiner w/1” (25mm) throat opening
18-D1 Large Twist-Lock Carabiner Steel twist-lock carabiner w/2” (50mm) throat opening
18-D2 Large Twist-Lock Carabiner Lightweight, aluminum twist-lock carabiner w/2-1/4” (57mm) throat opening

Permanent Anchorage Connectors

Model Number Product Description Occupations
&
Applications
410 Mounted D-ring Steel D-ring w/plate, complete w/four 3/8” (9.5mm) diameter bolts, lock washers, nuts & a drilling template
415 D-Bolt Anchor ½” (13mm) diameter D-bolt; 1-1/4” (32mm) long (one piece unit w/lockwasher & nut)
416 D-Bolt Anchor w/hardware D-bolt for up to 4” (100mm) working thickness (separate 5/8” (16mm) diameter bolt w/lockwasher & nut)
417 D-Bolt Anchor only Same as model 416 except without bolt w/lockwasher & nut

Temporary Horizontal Lifeline

Suspended Between two approved anchor points, the Miller Temporary Horizontal Lifeline System permits one worker to freely travel horizontal distances up to 60 feet (18m) to perform an array of construction, maintenance or inspection activities. The system includes: 5/8” (16mm) polyester rope lifeline, and lifeline tensioner, anchoring lanyard, convenient carrying bag.

Model Number Description Occupations
&
Applications
RHL30 Temporary horizontal lifeline system w/span of 30’ (9m)
RHL60 Temporary horizontal lifeline system w/span of 60’ (18m)
9031 Lifeline tensioner
9032 Anchoring lanyard
199RLS-5-30 30’ (9m) polyester rope lifeline
199RLS-5-60 60’ (18m) polyester rope lifeline

©2008 VER SALES, INC. All rights reserved