 |
|
|
|
|
|
|
|
MSA Anchorage Connectors
|
- Have a minimum breaking strength of 5,000 lb.
- Compatible for use with MSA fall arrest and confined space entry/retrieval components
- Meets ANSI Z359.1, ANSI A10.14, and OSHA standards
|
|
 |
|
 |
|
 |
Anchorage Connector Strap
Part No. 505282 |
|
Anchorage Connector Chain
Part No. 10003206 |
|
Anchorage Cable Sling
Part No.
SFP3267504 |
• Standard 5 ft. length, custom lengths available
• D-ring on one end and a sewn loop on the other end
|
|
• Temporary anchorage connector
• Useful near sharp edges or in high heat environments
|
|
• Standard lengths of 2’, 4’, and 6’,
custom lengths available
• Vinyl Coated
• 1/4” Galvanized Cable
|
|
|
 |
|
 |
Boom-Belt
Part No. SSB22040 |
|
Suretyman Anchorage Sling
Part No.’s
2’ = SFP2267402
4’ = SFP2267404
6’ = SFP2267406 |
• Attaches to boom arm
• Adjustable
• Allows for quick & easy installation
|
|
• 1” nylon tube webbing sewn into an endless loop
• Available in 2’, 4’, and 6’ lengths
• Can be hitched to an anchorage point using various configurations
|
|
|
| Anchorage Connectors Ordering Information |
| Part No. |
Description |
| 505282 |
Anchorage connector strap, nylon, 5’ |
| 505298 |
Anchorage connector strap, polyester, 5’ |
| 505314 |
Anchorage connector strap for RCD system, polyester |
| 10003206 |
Anchorage connector chain |
| 10023487 |
Thermatek anchorage connector strap |
| 10026763 |
Replacement wear pad for Thermatek anchorage connector strap |
| 10023490 |
Double D-ring anchorage connector strap with D-ring on each end |
| SSB22040 |
Boom belt, 1-3/4” nylon webbing, adjustable, one size fits all |
| SFP2267402 |
Suretyman anchorage sling, 2’ length |
| SFP2267404 |
Suretyman anchorage sling, 4’ length |
| SFP2267406 |
Suretyman anchorage sling, 6’ length |
| SFP3267502 |
Anchorage cable sling, 2’ length |
| SFP3267504 |
Anchorage cable sling, 4’ length |
| SFP3267506 |
Anchorage cable sling, 6’ length |
|
|
 |
|
 |
|
 |
Large Hook with Strap
Part No. 10002820 |
|
Large Hook with Shock Absorber
Part No. 10002821 |
|
Wire Clasp
Part No. 10003208 |
• Large 2-1/2” throat-opening hook with integral strap and D-ring
• Compatible with all MSA lanyards and vertical lifelines
|
|
• Large 2-1/2” throat-opening hook with integral shock absorber and D-ring
• Compatible with all MSA lanyards and vertical lifelines
|
|
• 3 sizes available to accommodate a wide range of structures
• Easy, simple installation
|
|
|
|
|
|
 |
|
 |
|
 |
Anchorage Connector Extension
Part No. 505233 |
|
D-Plate
Part No. 506632 |
|
Bolt D-ring with Hole
Part No. 10003213 |
• Vinyl coated
• 1/4” galvanized cable
• Standard 5’ length
|
|
• Provides permanent anchorage point
• Bolts to beams or columns
• Also available with 8”x 8” back-plate made of black anodized aluminum, galvanized steel, or stainless steel for attachment to concrete walls
|
|
• Permanent anchorage connector
• Attaches to bottom of I-beam flange, user supplies bolt
• Designed for horizontal installation
|
|
|
 |
D-Plate with back-plate
Part No. 506672
|
• Provides permanent anchorage point
• Bolts to beams or columns
• Also available with 8”x 8” back-plate made of black anodized aluminum, galvanized steel, or stainless steel for attachment to concrete walls
|
|
| Anchorage Connectors Ordering Information |
| Part No. |
Description |
| 505233 |
1/4” wire rope, vinyl coated, fixed length, 5’, RL20 snaphook one end, 3” O-ring on other end |
| 506212 |
Shackle .5” D-bolt anchor |
| 506632 |
D-plate anchorage connector, zinc-plated steel |
| 506633 |
D-plate anchorage connector, stainless steel |
| 506669 |
D-plate, anchor, with galvanized back-plate |
| 506672 |
D-plate, anchor, with anodized aluminum back-plate |
| 10002820 |
HL64 snaphook with 2.5” (64mm) gate with strap anchorage connector |
| 10002821 |
HL64 snaphook with 2.5” (64mm) gate with shock absorber |
| 10003207 |
Small wire clasp - 3 1/8” diameter |
| 10003208 |
Medium wire clasp - 4 1/8” diameter |
| 10003209 |
Large wire clasp - 5 1/2” diameter |
| 10003213 |
Bolt D-ring with hole only |
|
|
|
|
 |
|
 |
|
 |
|
 |
BeamGrip
Pictured with Optional D-ring insert and Swivel D-ring
Part No. 506682 |
|
Adjustable Beam Grip
Part No. 10003210 |
|
BeamGlide Trolley Removable
Part No. 506266 |
|
Rail-Slider
Part No. SFPRS6000 |
• Attaches to I-beam flange - no tools required
• Optional D-ring insert (P/N 506643) and/or swivel D-ring (P/N 506673) can provide anchorage connection for one or two person (D-rings sold separately)
|
|
• Quick, easy installation to I-beams with 4”to 12” flange width
• Integral strap and D-ring allows compatible means of connection
|
|
• Provides horizontal mobility keeps anchorage connector directly overhead
• Sizing to fit all beams
|
|
• Provides fall protection during horizontal movement on railway bridges
• Quick and easy installation
• 2 sizes available
|
|
|
 |
Permanent Roof Anchor
Part No. 10016468 |
• All steel construction
• Fits all pitches of roof trusses or rafters
• Easy to install without special tools
|
|
| Anchorage Connectors Ordering Information |
| Part No. |
Description |
| 506252 |
BeamGlide trolley, fixed, specify beam size |
| 506266 |
BeamGlide trolley, removeable, ball lock pin, specify beam size |
| 506379 |
Trolley end stops (pair) |
| 506643 |
D-ring fitting BeamGrip, anchor connector |
| 506673 |
Anchorage D-ring, swivel mount, zinc plated |
| 506682 |
BeamGrip for beams with flange width: 3.94” to 5.64” flange thickness: .215” to .622” |
| 415171 |
flange width: 5.5” to 8.0” flange thickness: .44” to .56” |
| 415172 |
flange width: 8.06” to 10.475” flange thickness: .66” to .76” |
| 415173 |
flange width: 10.265” to 12.8” flange thickness: .85” to .99” |
| 10003210 |
Adjustable beam grip |
| SFPRS6000 |
Rail-Slider, steel, galvanized, for 80 - 136 # rail, used on train/crane type rail, [carabiner required - sold seperately] |
| SFPRS7000 |
Rail-Slider, steel, galvanized, for 175 # rail, used on train/crane type rail, [carabiner required - sold seperately] |
| SFPRS8000 |
Rail-Slider, steel, galvanized, for 171 # rail, used on train/crane type rail, [carabiner required - sold seperately] |
| 10030608 |
Rail-Slider, steel, galvanized, for 141 # rail, used on train/crane type rail, [carabiner required - sold seperately] |
| 10016468 |
Permanent roof anchor - 2”x 4” |
| 10017593 |
Permanent roof anchor - 2”x 6” |
| 10017594 |
Permanent roof anchor - 2”x 8” |
| 10017595 |
Permanent roof anchor - 2”x 10” |
| 10017596 |
Permanent roof anchor - 2”x 12” |
|
|
|
PointGuard Anchorage Connector
The PointGuard Anchorage Connector provides a secure point of attachment for residential and concrete construction applications. The PointGuard Anchorage Connector can be installed in seconds, and when the anchorage connector is no longer needed a worker can simply cut the protruding strap and throw it away. The PointGuard Anchorage Connector is:
• Economical
• Available in 2 models -
- Residential Construction
- A standard length of 3’
- Available with or without a steel D-Ring
- Concrete Construction
- A standard length of 4’
- Includes protective sheath
- Available with or without a steel D-Ring
• 1 ¾” Durable Polyester Webbing with 5000 pound minimum breaking strength
Designed to comply with all applicable OSHA regulations as well as ANSI A10.14 and ANSI Z359.1
|
|
 |
 |
PointGuard Residential
Part No. 10042792 |
PointGuard Concrete
Part No. 10042794 |
|
|
|
Carabiners
|
|
 |
|
 |
|
 |
|
 |
|
 |
Part No.
506259 |
|
Part No.
506572 |
|
Part No.
506308 |
|
Part No.
SRCC734G |
|
Part No.
SRCC413 |
• 7/8” (22mm) gate opening
• Autolocking
• Aluminum
|
|
• 7/8” (22mm) gate opening
• Autolocking
• Steel
|
|
• 2” (50mm) gate opening
• Autolocking
• Steel
|
|
• 2.1” (52mm) gate opening
• Autolocking
• Steel
|
|
• 9/16” (14mm) gate opening
• Autolocking
• Steel
|
|
|
|
|
|
|
|
|
|
 |
|
 |
|
 |
|
 |
|
 |
Part No.
SRCA613 |
|
Part No.
SRCA853 |
|
Part No.
SRCC643 |
|
Part No.
SRCC740 |
|
Part No.
SRCC642 |
• 3/4” (19mm) gate opening
• Autolocking
• Aluminum
|
|
• 1” (25mm) gate opening
• Autolocking
• Aluminum
|
|
• 1”(25mm) gate opening
• Autolocking
• Steel
|
|
• 2” (50mm) gate opening
• Autolocking
• Steel
|
|
• 1.2” (32mm) gate opening
• Autolocking
• Steel
• NFPA Approved
|
|
|
| Carabiner Ordering Information |
| Part No. |
Description |
| 506259 |
Carabiner, 7/8” (22 mm) gate, twist lock, aluminum |
| 506572 |
Carabiner, 7/8” (22 mm) gate, twist lock, steel |
| 506308 |
Carabiner, 2” (50 mm) gate, twist lock, steel |
| SRCC413 |
Carabiner, 9/16” (14 mm) gate (small), autolocking, steel, with captive eye |
| SRCA613 |
Carabiner, 3/4” (19 mm) gate (medium), autolocking, aluminum |
| SRCA853 |
Carabiner, 1” (25 mm) gate (medium), autolocking, aluminum |
| SRCC643 |
Carabiner, 1” (25 mm) gate (large), autolocking, steel |
| SRCC734G |
Carabiner, 2.1” (52 mm) gate (extra large), autolocking, steel |
| SRCA722 |
Carabiner, 2.1” (52 mm) gate (extra large), autolocking, aluminum |
| SRCC963 |
Carabiner captive eye, autolocking, steel |
| SRCC641 |
Carabiner, large D design, 1.2” (32 mm) gate, screwgate, steel |
| SRCC642 |
Carabiner, large D design, 1.2” (32 mm) gate, auto-locking, steel |
| SRCC202 |
Carabiner, offset D design, 1” (25 mm) gate, super-safe, steel |
| SRCC740 |
Carabiner, offset D design, 2” (50 mm) gate, auto-locking, steel |
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
©2008 VER SALES, INC. All rights reserved
|
|
|
|
|
