MSA Shock Absorbing Lanyards

Energy absorbing lanyards are a component of a personal fall arrest system. They provide a means of connection between the back (dorsal) D-ring of MSA full body harnesses and a qualified anchorage and anchorage connector. The energy absorber keeps fall arrest forces below ANSI and OSHA limits and deceleration distance is controlled to a maximum of 42 inches. The lanyard is available in strap, rope, and wire rope configurations with a variety of snaphooks.
DYNA-MIGHT SHOCK ABSORBING LANYARDS

The Dyna-Might lanyard incorporates the innovative technology of the Dyna-Brake lanyard with the advantage of a lightweight, low-profile body. A durable Olefin cover provides extraordinary abrasion, heat, and cold resistance. The Dyna-Might lanyard meets ANSI A10.14, ANSI Z359.1, and all applicable OSHA standards.

Dyna-Might Lanyards with 1" Strap, 6' Length
Material Type
Part No. Nylon Harness Connection Anchorage Connection Twin-Leg Adjustable Fixed
501044 X HL2000 HL2000 X
501054 X HL2000 HL2000 X
501589 X RL20 2 HL2000 X X
Dyna-Might Lanyards with 1/2” Rope, 6’ Length
Material Type
Part No. Nylon Harness Connection Anchorage Connection Adjustable Fixed
501017 X HL2000 HL2000 X
501303 X HL2000 HL2000 X
Dyna-Might Lanyard with 1/4" Wire Rope, Vinyl Coated, 6' Length
Part No. Harness Connection Anchorage Connection Type
501168 HL2000 HL2000 Fixed

ONYX™ SHOCK ABSORBING LANYARDS

The Onyx lanyard is a sleek, innovative design in shock absorbing lanyards! The lightest weight lanyard available, the Onyx lanyard features a strong, durable sheath. It is also bi-directional, making it even easier to train your personnel. This longer-wearing lanyard is also available in a Twin-Leg configuration. Meets ANSI A10.14 and OSHA regulations.

Onyx Shock Absorbing Lanyards, Strap, 6' Length
Nylon, single piece construction, 6' fixed length, shock absorbing lanyard
Part No. Harness Connection Anchorage Connection Twin-Leg
10003020 HL2000 HL2000
10003021 RL20 RL20
10003022 HL2000 HL64
10012311 HL2000 (2)HL2000 X
10012312 RL20 (2)RL20 X
10012313 HL2000 (2) HL64 X

TIE-BACK SHOCK ABSORBING LANYARD

The integral adjustable D-ring of the MSA Tie-Back lanyard allows for a compatible means of connection, minimizes the potential for roll-out, and eliminates the necessity of a separate anchorage connector. The integral adjustable D-ring allows the MSA Tie-Back Lanyard to accommodate a wide variety of anchorage point shapes and sizes. The MSA Tie-Back Lanyard features:

  • Integral Dyna-Might shock absorber or Dyna-Brake shock absorber
  • Available in Twin-Leg configuration for 100% tie-off
  • Maximum arrest force of 900 lbf
  • Meets ANSI A10.14, ANSI Z359.1, and all applicable OSHA standards
Tie-Back Shock Absorbing Lanyard, Strap, 6' Fixed Length, Nylon
Part No. Nylon Polyester Shock
Absorber
Harness
Connection
Anchorage
Connection
Twin-Leg
10021670 X Dyna-Brake HL2000 HL2000
10021671 X Dyna-Brake HL2000 (2) HL2000 X
10021672 X Dyna-Brake HL2000 HL64
10021673 X Dyna-Brake HL2000 (2) HL64 X
10011792 X Dyna-Might HL2000 HL2000
10011793 X Dyna-Might HL2000 (2) HL2000 X
10011794 X Dyna-Might HL2000 HL64
10011795 X Dyna-Might HL2000 (2) HL64 X
SWL40206LI X Sure-Stop Sewn Loop (2) LI Snap X

THERMATEK™ SHOCK ABSORBING LANYARD

The Thermatek shock absorbing lanyard was specifically designed to take the heat and for use in the welding industry. This specialized shock absorbing lanyard features:

  • Tuffweld protective cover on the shock absorber that is superior to Nomex
  • Resistance to charring and burning
  • Unique shock absorber design that incorporates a Kevlar back-up strap
  • Thermatek 12 lanyard model is designed to arrest a free-fall up to 12’, and keep fall arrest forces below OSHA limits
Thermatek Shock Absorbing Lanyards
Part No. Model Harness Connection Anchorage Connection
10023485 Thermatek 6 lanyard HL2000 HL2000
10026049 Thermatek 6 lanyard RL20 RL20
10026048 Thermatek 12 lanyard HL2000 HL2000
10026060 Thermatek 12 lanyard RL20 RL20

"NO METAL ABOVE THE WAIST" SHOCK ABSORBING LANYARD

The “No Metal Above the Waist” shock absorbing lanyard was specifically designed to work in conjunction with the “No Metal Above the Waist” harness, which was designed for the utility industry worker. To maintain the “No Metal Above the Waist” configuration, this shock absorbing lanyard has a 9” sewn loop on one end which attaches to the back (dorsal) attachment point on the “No Metal Above the Waist” harness.

“No Metal Above the Waist” Shock Absorbing Lanyard
Dyna-Brake, polyester 1” strap, fixed 6’ length
Part No. Harness Connection Anchorage Connection Twin-Leg
501580 Sewn Loop RL20
501581 Sewn Loop (2) RL20 X

FP DIAMOND™ SHOCK ABSORBING LANYARD

The FP Diamond shock absorbing lanyard raises the standard for shock absorbing lanyards with these exciting features:

  • Keeps fall arrest forces below 900 lbs
  • Available in a single or twin-leg configuration
  • Meets ANSI Z359.1 and OSHA standards
  • CSA certified
FP Diamond Shock Absorbing Lanyard Ordering Information
Polyester, single piece construction, fixed length, shock absorbing lanyard
Part No. Harness
Connection
Anchorage
Connection
Twin-Leg Length
5' 6' 10'
10023932* HL2000 HL2000 X
10023933* HL2000 HL64 X
10023933* HL2000 (2) HL2000 X X
10023971* HL2000 (2) HL64 X X
10023938* HL2000 HL2000 X
10023939* HL2000 HL64 X
10023936 HL2000 HL2000 X
10023937 HL2000 (2) HL2000 X X
10035039** HL2000 Sewn Loop X
* Not CSA certified.
**Actual length is 5’6”

DYNA-BRAKE® SHOCK ABSORBING LANYARD
  • Strong and durable
  • Uses rip-stitch technology to keep fall arrest forces below 900 lbs
  • Available in single or twin-leg configurations and with a variety of snaphooks
  • Meets ANSI Z359.1, ANSI A10.14, and OSHA standards
Part No. 10021663 Part No. 501562 Part No. 501563 Part No. 10015877
• 6' x adj. 1" wide nylon webbing

• HL2000 self-locking snaphooks

• 6' x adj. 1" wide nylon web twin lanyard

• RL20 self-locking snaphooks

• 6' x fixed 1" wide polyester web twin lanyard

• RL20 self-locking snaphooks

• 6' x adj. 1" wide nylon web twin lanyard

• HL2000 self-locking snaphook on one end and 2 GL3100 self-locking snaphooks on other ends

• Compatible with most concrete forms


SURE-STOP™ SHOCK ABSORBING LANYARD
  • Uses a tear tape design to keep fall arrest forces below 900 lbs
  • Meets ANSI Z359.1, and applicable OSHA regulations, and is CSA certified
  • Available in single or twin-leg configurations
  • Clear shock-absorber cover protects labels
Part No.
SWL2068704LS
Part No.
SWL2068804LS
Part No.
SWL2078106LS
Part No.
SWL40400206LS
Part No.
SWLP0635A

EXPANYARD™ SHOCK ABSORBING LANYARD

The Expanyard Shock Absorbing Lanyard is designed to stretch to a six-foot length. When relaxed, it stays close to the user’s body, reducing the possibility of trips and snags.

Part No. 10015900 Part No. 10013456 Part No. SWL60645D
• Single leg Expanyard

• HL2000 self-locking snaphooks

• Twin-leg Expanyard

• HL2000 self-locking snaphooks

Shock Absorbing Lanyard Ordering Information
Sure-Stop Lanyard Width 1-3/4 Inch Strap
Part No. Material Harness Connection Anchorage Connection Length Type
Nylon Polyester 4’ 6’ Twin-Leg Expandable Adjustable Fixed
SWL20204RM* X RM Snap Sewn Loop X X
SWL20400206RM* X RM Snap (2) RM Snap X X X
SWL2068704LS X LS Snap LS Snap X X
SWL2068706LS X LS Snap LS Snap X X
SWL2068106LS X LS Snap SHWS5386 X X
SWL2068804LS X LS Snap LS Snap X X
SWL2068806LS X LS Snap LS Snap X X
SWL2068806RM X RM Snap RM Snap X X
SWL2078106LS LS Snap HL64 X X
*Not CSA certified
Shock Absorbing Lanyards With 1 Inch Strap
Part No. Material Shock
Absorber
Harness
Connection
Anchorage
Connection
Length Type
Nylon Poly 4’ 6’ Twin-Leg Expanyard Adjust Fixed
10021661* X Dyna-Brake HL2000 (2) HL64 X X X
10021662* X Dyna-Brake HL2000 HL64 X X
10021663* X Dyna-Brake HL2000 HL2000 X X
10021664* X Dyna-Brake HL2000 HL2000 X X
10021665* X Dyna-Brake HL2000 HL2000 X X
10021666* X Dyna-Brake HL2000 HL2000 X X
10021667* X Dyna-Brake HL2000 (2) HL2000 X X X
10021668* X Dyna-Brake HL2000 (2) HL2000 X X X
10010550* X Dyna-Brake HL2000 (2) HL2000 X X X
10021669* X Dyna-Brake HL2000 (2) HL2000 X X X
10015877* X Dyna-Brake HL2000 (2) GL3100 X X X
416013* X Dyna-Brake RL20 HL64 X X
501222* X Dyna-Brake RL20 RL20 X X
501226* X Dyna-Brake RL20 RL20 X X
501235* X Dyna-Brake RL20 RL20 X X
501561* X Dyna-Brake RL20 (2) RL20 X X X
501562* X Dyna-Brake RL20 (2) RL20 X X X
501563* X Dyna-Brake RL20 (2) RL20 X X X
SWL40306LI X Sure-Stop LI Snap LI Snap X X X
SWL4068704LS X Sure-Stop LS Snap LS Snap X X
SWLP4068704LI* X Sure-Stop LI Snap LI Snap X X
SWLP0645A* X Sure-Stop Sewn loop (2) LI Snap X X X
SWLP0635A X Sure-Stop Sewn loop (2) LS Snap X X X
SWLP0630A X Sure-Stop Sewn loop LS Snap X X
SWL40400206LS X Sure-Stop LS Snap (2) LS Snap X X X
SWL40400206LSH X Sure-Stop LS Snap (2) HL64 X X X
SWL4068706LS X Sure-Stop LS Snap LS Snap X X
*Not CSA certified
Expanyard Shock Absorbing Lanyards With 6 ft Length, Nylon Strap
Part No. Shock
Absorber
Harness
Connection
Anchorage
Connection
Twin-Leg 1-3/4” Strap 1” Strap
10015900* Dyna-Brake HL2000 HL2000 X
10013456* Dyna-Brake HL2000 (2) HL2000 X X
SWL60645D* Sure-Stop Sewn loop (2) HL64 X X
SWL60645B* Sure-Stop Sewn loop (2) LI Snap X X
*Not CSA certified

Part No. 10021656 Part No. SNL4048404LS
• 6' x adj. 1/2" dia. nylon rope
• HL2000 self-locking snaphooks
Shock Absorbing Lanyards With 1/2" Nylon Rope
Part No. Shock
Absorber
Harness
Connection
Anchorage
Connection
Type Length
Adjustable Fixed 4’ 6’
10021656* Dyna-Brake HL2000 HL2000 X X
10021657* Dyna-Brake HL2000 HL2000 X X
SNL4048404LS Sure-Stop LS Snap LS Snap X X
SNL4048406LS Sure-Stop LS Snap LS Snap X X
SNL4098604LS Sure-Stop Swivel LS Snap LS Snap X X
*Not CSA certified

Part No. 10021655 Part No. 10021653 Part No. SCL4067304LS
• 6' x 7/32" dia. vinyl-coated wire rope

• HL2000 self-locking snaphooks

• 6' x 7/32" dia. wire rope twin-leg

• HL2000 self-locking snaphooks

Shock Absorbing LanyardsWith 1/4” Wire Rope, Vinal Coated, Fixed Length
Part No. Shock
Absorber
Harness Connection Anchorage Connection Twin-Leg 4’ 6’
10021655* Dyna-Brake HL2000 HL2000 X
10021653* Dyna-Brake HL2000 (2) HL2000 X X
SCL4067304LS Sure-Stop LS Snap LS Snap X
SCL4067306LS Sure-Stop LS Snap LS Snap X
SCL4067306RM Sure-Stop RM Snap RM Snap X
SCL4068104LS Sure-Stop LS Snap HL64 X
SCL4068106LS Sure-Stop LS Snap HL64 X
*Not CSA certified

SHOCK ABSORBING SUB-ASSEMBLY

The Shock Absorbing Sub-Assembly may be connected to a compatible lanyard to create a non-integral lanyard connector subsystem for fall arrest.

Shock Absorbing Devices, Nylon
Part No. Shock Absorber Harness Connection Anchorage Connection Length
10021654* Dyna-Brake HL2000 D-ring 2 2 ”
SSA4001LS Sure-Stop Soft loop LS Snap
SSA4002LS Sure-Stop LS Snap D-ring
SSA4002RM Sure-Stop RM Snap D-ring
SSA4003 Sure-Stop Soft loop D-ring
*Not CSA certified

©2006 VER SALES, INC. All rights reserved