MSA Permanent Horizontal Lifelines
|
| HORIZON HORIZONTAL LIFELINES
The MSA Horizon Horizontal Lifeline anchorage connecting system is designed for portability, versatility, ease of installation and ease of use. The system may be mounted to existing overhead steel beams or to newly constructed steel structure where overhead anchorage points are not available. Horizontal travel through intermediate supports is achieved without disconnection of the worker’s personal fall arrest system. The system may accommodate up to five persons. The unique shock absorber reduces dynamic forces transmitted to the anchorage points. Stanchion system may be installed on the top or bottom flange of an I-beam. Typical applications include new construction (steel erection), inspection and maintenance operations, loading bays, bridges, overpasses, aircraft hangars, manufacturing, petrochemical, chemical and food processing plants. Meets OSHA requirements.
|
|
|
Horizontal Lifeline Ordering Information
For Basic Below Beam Mount Sub-System |
| Part No. |
Description |
| 506682 |
Beamgrip for beams with
flange width: 3.94” to 5.64” flange thickness: .215” to .622” |
| 415171 |
flange width: 5.5” to 8.0” flange thickness: .44” to .56” |
| 415172 |
flange width: 8.06” to 10.475” flange thickness: .66” to .76” |
| 415173 |
flange width: 10.265” to 12.8” flange thickness: .85” to .99” |
| 415836 |
Horizontal lifeline shock absorber |
| 506563 |
3/8” open wedge socket |
| 506636 |
Beamgrip bypass fitting |
| 506637 |
Beamgrip end fitting |
| 506648 |
3/8” wire rope*, 30 ft, galvanized |
| 506662 |
12” turnbuckle with plate |
| 506663 |
Snatch block pulley for 3/8” wire rope |
| 506254 |
for 1/2” wire rope |
| 506255 |
for 5/8” wire rope |
|
|
| Basic Stanchion Mount Sub-System
Parts required for this system: 5 Beamgrips (Part No. depends on size of Beam Flange); 2 - 506646; 1 - 506647; 1 - 506648 (30’); 1 - 506645; 1 - 415836; 3 - 506665; 1 - 506649
|
|
|
|
|
Horizontal Lifeline Ordering Information
For Basic Stanchion Mount Sub-System |
| Part No. |
Description |
| 506682 |
Beamgrip for beams with
flange width: 3.94” to 5.64” flange thickness: .215” to .622” |
| 415171 |
flange width: 5.5” to 8.0” flange thickness: .44” to .56” |
| 415172 |
flange width: 8.06” to 10.475” flange thickness: .66” to .76” |
| 415173 |
flange width: 10.265” to 12.8” flange thickness: .85” to .99” |
| 415836 |
Horizontal lifeline shock absorber |
| 506645 |
Cable clamp |
| 506646 |
Beamgrip end stanchion |
| 506647 |
Beamgrip bypass stanchion |
| 506648 |
3/8” wire rope*, 30’, galvanized |
| 506649 |
Wire rope clip 3/8” |
| 506663 |
Snatch block pulley for 3/8” wire rope |
| 506254 |
for 1/2” wire rope |
| 506255 |
for 5/8” wire rope |
| 506665 |
Beamgrip stanchion insert |
|
|
|
| BELOW BEAM HLL KITS:
• Choose from 4 kits
• 30 ft kits include:
- 2 beamgrips (choose from P/N 415171 or P/N 415172)
- 2 end fittings (P/N 506637)
- Shock absorber (P/N 415836)
- Lifeline (P/N 506648 - 30 ft)
- Open wedge socket (P/N 506563)
- Turnbuckle (P/N 506662)
|
 |
|
• 60 ft kits include:
- 3 beamgrips (choose from P/N 415171 or P/N 415172)
- 2 end fittings (P/N 506637)
- Shock absorber (P/N 415836)
- Lifeline (P/N 506648 - 60 ft)
- Open wedge socket (P/N 506563)
- Turnbuckle (P/N 506662)
- Manual Bypass (P/N 506636)
|
|
| STANCHION HLL KITS:
• Choose from 4 kits
• 30 ft kits include:
- 4 beamgrips (choose from P/N 415171 or P/N 415172)
- 2 end stanchions (P/N 506646)
- 2 Stanchion inserts (P/N 506665)
- Lifeline (P/N 506648 - 30 ft)
- Wire rope clip (P/N 506649)
- Cable clamp (P/N 506645)
- Shock absorber with turnbuckle (P/N 415836)
|
|
• 60 ft kits include:
- 5 beamgrips (choose from P/N 415171 or P/N 415172)
- 2 end stanchions (P/N 506646)
- 3 Stanchion inserts (P/N 506665)
- Lifeline (P/N 506648 - 60 ft)
- Wire rope clip (P/N 506649)
- Cable clamp (P/N 506645)
- Shock absorber with turnbuckle (P/N 415836)
- Intermediate Stanchion with
- Manual Bypass (P/N 506647)
|
|
|
| Component parts for HLL Kits |
|
|
|
|
Horizontal Lifeline Kits Ordering Information
For Below Beam and Stanchion Mount Sub-System |
| Part No. |
Description |
| 10030270 |
HLL Kit #1, 30’ Below Beam system, for I-beams with flange width 5.5” - 8” and flange thickness .44” - .56” |
| 10030271 |
HLL Kit #2, 60’ Below Beam system, for I-beams with flange width 5.5” - 8” and flange thickness .44” - .56” |
| 10030272 |
HLL Kit #3, 30’ Below Beam system, for I-beams with flange width 8.06” - 10.475” and flange thickness .66” - .76” |
| 10030273 |
HLL Kit #4, 60’ Below Beam system, for I-beams with flange width 8.06” - 10.475” and flange thickness .66” - .76” |
| 10030274 |
HLL Kit #5, 30’ Stanchion system, for I-beams with flange width 5.5” - 8” and flange thickness .44” - .56” |
| 10030275 |
HLL Kit #6, 60’ Stanchion system, for I-beams with flange width 5.5” - 8” and flange thickness .44” - .56” |
| 10030276 |
HLL Kit #7, 30’ Stanchion system, for I-beams with flange width 8.06” - 10.475” and flange thickness .66” - .76” |
| 10030277 |
HLL Kit #8, 60’ Stanchion system, for I-beams with flange width 8.06” - 10.475” and flange thickness .66” - .76” |
|
|
| WINGSPAN™ HLL STANCHION
The Wingspan HLL Stanchion is an anchorage connector used for the installation of horizontal lifeline systems. Designed with a jaw clamp screw, Wingspan HLL Stanchions are easily installed on steel girders or base plates fitted to bridge rail ties to provide a strong stable connection point for the approved horizontal lifeline system. The Wingspan HLL Stanchions can be used as the end or intermediate connection points for either a single or multi-span horizontal lifeline system.
|
Anchorage Bracket Also Features:
- Engineered A-frame design
- Constructed of galvanized steel
- Jaw clamp screw allows for quick & easy installation
- Collapsible A-frame for easy transport & storage
- Meets all applicable OSHA regulations & ANSI standards
|
 |
|
SHLARD6SHIM
• Used in conjunction with the Wingspan HLL Stanchion, only when the distance (d) from the beam web to the end of the flange is less than 3.625”.
|
 |
|
|
|
|
SHLARE4 Bridge Rail Tie Bracket
The Bridge Rail Tie Bracket is used to create a means of attachment for the Wingspan HLL Stanchion to bridge rail ties.
|
|
|
|
| MSA Anchorage Bracket Ordering Information |
| Part No. |
Description |
| SHLARD6A |
Wingspan™ HLL Stanchion A-frame design, galvanized steel |
| SHLARE4 |
Bridge Rail Tie Bracket (includes 4 SHLARTB14 T-Bolts) |
| SHLARTB14 |
Replacement T-Bolt (14”) for SHLARE4 Bracket |
| SHLARD6SHIM |
Anchorage brackeet shim (for beam flange widths under 3.6”) |
|
|
| HORIZON® REBAR ANCHORAGE
The Horizon Rebar Anchorage provides a secure horizontal lifeline attachment to rebar. Features include:
- Quick & easy set up
- No special tools required for installation
- Sturdy tubular steel construction
- One rebar anchorage can support a horizontal lifeline in 2 directions
- Fits most common rebar sizes
- Easy to use J-bolt fasteners with speed nuts for secure attachment to rebar
- Supports up to 4 workers per system with in-line shock absorber, maximum of 2 workers per span
- Meets applicable OSHA and ANSI standards
|
|
|
|
|
| Horizon Rebar Anchorage Ordering Information |
| Part No. |
Description |
| 10018424 |
Horizon Rebar Anchorage (includes 2 frames, 8 J-bolts, 8 speed nuts, and hardware to fasten frames) |
| 10018425 |
J-bolt replacement kit (includes 4 J-bolts and 4 speed nuts) |
| 10018925 |
Intermediate support for rebar anchorage (1 double clevis) [Note: this part number must be ordered in conjunction with 10018424 for a complete intermediate support bracket] |
| 10020164 |
Installation and use of Horizon Rebar Anchorage video |
| 506563 |
Open wedge socket |
| 506662 |
Turnbuckle with plate |
| 415836 |
HLL shock absorber with turnbuckle |
| 506648 |
3/8” galvanized wire rope lifeline (30 ft length) (add $1.50/ft for length over 30 ft) |
|
 |
|
|
| LATCHWAYS MANSAFE® HORIZONTAL LIFELINE
The Latchways ManSafe® Horizontal Lifeline systems are designed to operate horizontally, around corners, and up or down inclines to offer continuous worker protection regardless of the building type or structure. ManSafe Horizontal Lifeline features include:
- Unsurpassed system flexibility
- Can support up to 6 workers per lifeline
- Unique Latchways Transfastener rotates freely through intermediate supports to enable hands-free operation
- Transfastener can be removed/installed at any point along the lifeline
- Integral shock absorber limits fall arrest forces
- Stainless steel components for durability
- 8mm, 7 x 7 stainless steel cable
- Mounting hardware to install the system to almost any type of structure
As an authorized Latchways installer, MSA can provide the fall hazard analysis, engineering services, custom product fabrication, system installation, system certification, and training necessary to make your fall protection program a success. Each Latchways Mansafe system must be individually designed to meet your specific application. The Latchways Horizontal Lifeline systems can only be installed by Latchways trained and certified professionals.
|
 |
 |
 |
| Transfastener engages first leg of hanger. The starwheels start to rotate backwards, allowing the slipper to slide along the wire between hangar legs. |
Transfastener moves forward and the starwheels continue to rotate while remaining in contact with the slipper which is passing through hanger loops. |
Transfastener clears the second leg of hanger and continues forward with slipper still sliding along the wire. |
|
 |
|
|
| SURE-RAIL™ HORIZONTAL LIFELINE
The Sure-Rail system is a rigid rail horizontal lifeline system typically used in areas when there is limited clearance below the working surface. The system consists of galvanized steel ½” x 2” x 10’ rail sections, a rail trolley, end stops, and various mounting hardware. The rails are anchored to supporting structure, while the trolley provides a mobile connection point for the user. The rail sections are affixed to an approved anchorage at 5 ft intervals. End-stops prevent accidental detachment of the trolley from the rail. The Sure-Rail system is available in many standard configurations, but can also be customized to fit your application (for custom applications, please call 1-888-421-8324 or in Canada call 1-800-267-0672). For example, a swing arm option can be installed that allows the system to retract against a wall when not in use with the assistance of pneumatic cylinders (Possible interference that would require this option, would be an overhead crane moving in a perpendicular direction to the fall protection system).
In addition, the Sure-Rail system provides:
- Ease of movement (smooth trolley action)
- Little or no deflection in the rail limits fall distance and fall arrest forces on the body
- Design that allows for even distribution of fall arrest forces to the structure
- Twin track configuration that allows users to bypass each other without having to disconnect and re-connect
- Spring loaded end –stops for easy insertion/removal of the trolley
- Aluminum trolley with stainless steel wheels
- Bent rails available for travel around corners
|
 |
|
|
|
|
|
| SURE-RAIL TRUCK/RAIL CAR LOADING KITS: |
Sure-Rail 60’ Kit - P/N 10030601
60' single track |
| Part No. |
Product |
Qty. |
| SHLSR0021000 |
1/2" x 2" rail |
6 |
| SHLSR00501 |
Splice joining hardware |
6 |
| SHLSR00601 |
Spacers |
12 |
| SHLSR00703 |
Standard anchorage bolts |
12 |
| SHLSR00801 |
Anti-slip off collars |
2 |
| SHLSR00104 |
Sure-Rail Trolley |
1 |
| SRCC643 |
Carabiner |
1 |
| *Additional attachment hardware and/or brackets may be required to install Sure-Rail System to structure. |
|
|
Sure-Rail 80’ Kit - P/N 10030602
80' single track |
| Part No. |
Product |
Qty. |
| SHLSR0021000 |
1/2" x 2" rail |
8 |
| SHLSR00501 |
Splice joining hardware |
8 |
| SHLSR00601 |
Spacers |
16 |
| SHLSR-007-03 |
Standard anchorage bolts |
16 |
| SHLSR00801 |
Anti-slip off collars |
2 |
| SHLSR00104 |
Sure-Rail Trolley |
1 |
| SRCC643 |
Carabiner |
1 |
| *Additional attachment hardware and/or brackets may be required to install Sure-Rail System to structure. |
|
|
| Sure-Rail Horizontal Lifeline Ordering Information |
| Part No. |
Description |
| SHLSR00104 |
Sure-Rail Trolley, Heavy Duty (required for retractable lifelines) |
| SHLSR0021000 |
Sure-Rail, galvanized, predrilled, 1/2” (12mm) x 2” (50mm) x 10 ft (3m) |
| SHLSR00501 |
Sure-Rail Splice, galvanized, with bars and hardware [required every 10 ft (3m)] |
| SHLSR00601 |
Sure-Rail Spacer, galvanized [required every 5 ft (1.5m)] |
| SHLSR00703 |
Sure-Rail Anchorage Bolt, galvanized [required every 5 ft (1.5m)] |
| SHLSR00801 |
Sure-Rail Anti-Slip Off Collar, steel, painted (required at both ends of system) |
| 10030601 |
Sure-Rail Truck/RailCar Loading 60 ft Kit |
| 10030602 |
Sure-Rail Truck/RailCar Loading 80 ft Kit |
|
|
|
|
|
MSA Temporary Horizontal Lifelines
|
| TEMPORARY SYNTHETIC HORIZONTAL LIFFELINES
Designed for easy installation and removal, these temporary horizontal lifeline systems were created for a wide range of applications. The system may be mounted to any suitable 5,000 lb rated anchorage. Both systems can be rigged using many standard components, reducing the need for special or “engineered” equipment.
Dyna-Line® HLL
- Highly visible 12 strand red rope will not hockle and minimizes fall distance due to its low stretch properties.
- Available in a Single Worker or Two Worker system.
- Available in lengths up to 200 ft. System comes in a handy bucket for lengths up to 60 ft.
- Meets all OSHA requirements and ANSI A10.14 standards.
Sure-Line™ HLL
- Includes integral energy absorber.
- 5/8” black nylon kernmantle rope.
- Available in lengths up to 60 ft.
- Rated for two workers
- Includes 2 cable anchor slings
- Includes storage bag
|
 |
| Synthetic Horizontal Lifelines Ordering Information |
| Part No. |
Description |
| 10013150 |
Dyna-Line Temporary Horizontal Lifeline for single worker, 30 ft rope |
| 10013151 |
Dyna-Line Temporary Horizontal Lifeline for single worker, 60 ft rope |
| 10019084 |
Dyna-Line Temporary Horizontal Lifeline for single worker, 100 ft rope |
| 10022826 |
Dyna-Line Temporary Horizontal Lifeline for single worker, 200 ft rope |
| 10013152 |
Dyna-Line Temporary Horizontal Lifeline for two workers, 30 ft rope* |
| 10013153 |
Dyna-Line Temporary Horizontal Lifeline for two workers, 60 ft rope* |
| 10019085 |
Dyna-Line Temporary Horizontal Lifeline for two workers, 100 ft rope* |
| 10022827 |
Dyna-Line Temporary Horizontal Lifeline for two workers, 200 ft rope* |
| SHL1009035BLK |
Sure-Line Temporary Horizontal Lifeline, 35 ft black rope |
| SHL1009060BLK |
Sure-Line Temporary Horizontal Lifeline, 60 ft black rope |
| * Dyna-Line Two Worker system includes 2 polyester anchorage straps. |
|
 |
|
|
| TEMPORARY CABLE HORIZONTAL LIFELINES
Sure-Line™ Temporary Horizontal Lifelines
The Sure-Line temporary Horizontal Lifeline is a lightweight cable system that is suspended between two approved anchor points to provide worker fall protection during horizontal movement. Designed for quick and easy installation at temporary work sites, the Sure-Line system:
- Includes an integral shock absorber
- Available in 20 ft, 40 ft, or 60 ft lengths
- Uses a 3/8”, 6X36 galvanized cable
- Available in 2 models, with or without turnbuckle
- Rated for up to 2 people
- Incorporates a combination clamp/thimble that allows for effortless tensioning of lifeline
|
| Sure-Line Horizontal Lifeline Ordering Information |
| Part No. |
Description |
| SHL2009020 |
Steel Cable Horizontal Lifeline System with turnbuckle, 20 ft (6 m) |
| SHL2009040 |
Steel Cable Horizontal Lifeline System with turnbuckle, 40 ft (12 m) |
| SHL2009060 |
Steel Cable Horizontal Lifeline System with turnbuckle, 60 ft (18 m) |
| SHL2009040IW |
Iron Worker Cable Horizontal Lifeline System without turnbuckle, 40 ft (12 m) |
| SHL2009060IW |
Iron Worker Cable Horizontal Lifeline System without turnbuckle, 60 ft (18 m) |
|
 |
|
|
